PELICAN POOL portable pool lift
PELICAN POOL is the portable lift for a pool the other models cannot reach over: it works where the outer wall stands up to 50 cm above the deck. The seat rotates under power through 250 degrees, so the user turns himself from the deck to the water and back without an assistant, and end-stroke sensors stop the rotation at its limits.
Side stabilisers with safety sensors take the load while the seat swings out. Lifting, lowering and rotation are commanded from a push-button handset on a spiral cable, rated IPX6 and workable from the water. The seat folds to reduce the parked size, a headrest is supplied, the armrests adjust and the leg support retracts; the user is held by a two-point belt. The battery is removable for charging and average autonomy is 30 working cycles, lower than the 50 cycles of the other portable models. Rear wheels pivot and brake; in-water parts are stainless steel over a galvanised, powder-coated frame.
| Code | AVDG1010 |
| Type | Portable, no floor anchorage |
| Capacity | Not stated in the AVK catalog page |
| Rotation | 250 degrees, motorised, with end-stroke sensors |
| Application | Pools with an outer wall up to 50 cm high |
| Power | Removable battery with charger |
| Autonomy | About 30 working cycles |
| Controls | Spiral-cable push-button handset for lifting, lowering and rotation, IPX6, operable from the water; emergency stop |
| Safety | Side stabilisers with safety sensors, braked rear wheels, two-point belt |
| Seat | Folding seat, headrest included, adjustable armrests, retractable leg support |
| Wheels | Pivoting rear wheels with brakes |
| Material | Stainless steel for in-water parts; galvanised and powder-coated frame |
| Lead time | 90 days |
Variants and sets
| AVDG1010 | PELICAN POOL, portable lift, 250 degree motorised seat rotation, outer wall up to 50 cm |